UserName: PassWord:
My account
My account
Concrete Mixer Truck 9m3,China Concrete Mixer Truck 9m3
ETW International,ETW Manufacturers
C
Concrete Mixer Truck 9m3

Concrete Mixer Truck 9m3



ConcreteMixer Truck 9m3

Concrete mixer truck is a vehicle specially designed for the transportation ofconcrete for construction. Motive power is produced by the power takeoff thenpassed to the hydraulic pump. The hydraulic pump produces hydraulic energywhich is transmitted to hydraulic motor for conversion into kinetic energy.This energy is then transferred to the mixing drum through the effect ofdecelerating the speed of rotation.
Users can adjust the angle of the hydraulic pump servo handle to control therotating speed and the positive or negative rotation of the mixing drum. Thisfacilitates charging, stirring, mixing, and discharging operations.

As a specialized concrete mixer truck manufacturer in China, wecan produce various concrete mixer trucks of different agitating capacities.
The concrete mixer truck is fitted with a diesel 4-stroke direct injectionengine which has little emission levels.
Our concrete mixer truck 9m3 and other equipment have receivedISO9001-2000 certification and 3C certification. They sell well in Vietnam, Myanmar, Malaysia,Peru, Cuba, Chad, Sudan, Egypt, Ghana, Nigeria, South Africa, Ethiopia,Angola, Algeria, Ukraine, Russia, and more. Please contact us if you intend to buy and of ourproducts.

Parameters ofConcrete Mixer Truck 9m3

Engine

Type

Diesel 4-stroke direct injection engine,6-cylinder in-line with water cooling, turbo-charging & intercooling

Displacement

9.726 liters

Maximum Output

336HP

Max torque

1250NM@1400-1600rpm

Bore

126mm

Stroke

130mm

Mean Piston speed

9.5m/s

Compression ratio

16:1

Specific fuel consumption

197g/kwh

Engine oil filling quantity

19liters

Cooling system filling quantity (long-term filling)

40liters

Thermostat with 71 opening begin rigid fan clutch model

430

Type

Single-plate dry clutch, mechanically operating with air assisted.

Plate diameter

420mm

Gear box

Model

Fuller RT-11509C

No. of speeds

9 forward,1 reverse

Forward ratio

12.42;8.26;6.08;4.53;3.36; 2.47;1.81;1.35:1

Reverse ratio

12.99

Front axle

Type

Elliot axle

Max. load

6500kg

Tandem axle

Type

Pressed axle housing, single reduction with planetary wheel redactor

Ratio

5.73

Max. load

213000kg

Front suspension

9 semi-elliptic leaf springs with shock absorbers

Rear suspension

12 semi-elliptic leaf springs with swing springs

Frame

Type

Parallel ladder with U-profiles and riveted cross members

Steering

Model

ZF8098

Type

Hydraulic power steering

Ratio

26.2

Fuel and capacity

300 liters, lockable

Wheels and tires

Rim

8.5-24

Tire

12.00-20

No. of tires

10

Spare wheel carrier

With one spare wheel

Brakes

Service brake

Dual circuit pneumatic brake

Parking brake

Spring energy, compressed air operating on rear wheels

Auxiliary brake

Engine exhaust brake

Cabin

All-steel forward control, 70hydraulically tiltable to the front, 3-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial , hydraulically damped adjustable drivers seat & rigid adjustable co-drivers seat, heating & ventilation system, adjustable roof flap, with stereo radio/cassette recorder, safety belt, air conditioner

Capability

2 persons

Electric equipment

Operating voltage

24V,negative grounded

Starter

24V,5.4kw

Alternator

28V,756w

Batteries

212v, 135Ah Cigar-lighter, horn headlamp, fog light, reverse light.

Instrument panel

Active check control with indicators, with this instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant

Front wheel alignment

Camber

1

Caster

3

King pin inclination

1

Toe-in (measured at the wheel diameter 648mm with cross-ply tire)

3-4.5mm

Overall dimension (length width height)

Overall dimension (length width height)

871525003850mm

Wheelbase

3625+1350mm

Track Front

2022mm

Rear

2041mm

Approach angle

16

Departure angle

35

Front overhang

1500mm

Rear overhang

2215mm

Mass parameter

Dead weight

13100kg

Pay loading

11900kg

Total mass

25000kg

Performance

Driving type

64

Maximum driving speed (km/h)

90/102km/h

Minimum turning circle

23m

Body

Drum Volume

16.5m3

Agitating capacity

9m3

Drum slope

11

Drum rotating speed

0-16r/min

Water tank volume

400liters

Discharged remain ratio

<0.5%

Feedback Form
Other Products
  • 8×4 Tipper84 Tipper84 tipper is usually used in civil engineering. It canwork together with the excavating machine, shovel wheel loader, and beltconveyor to loa
  • Side Dump TruckSide Dump TruckDescription ofSide Dump Truck: 1. Our side dump truck is produced in accordance withthe standards stipulated by China.2. The axels, sus
  • 4×2 Tractor Truck42 Tractor TruckDescriptions of42 Tractor TruckWe adopt the most popular molding techniques whendesigning the driving cab of the 42 tractor truck. Its
  • 6×4 Tractor Truck64 Tractor TruckDescriptions of64 Tractor TruckWe adopt the most popular molding technique whendesigning the driving cab of the 64 tractor truck. Our
  • 6×6 Tractor Truck66 Tractor TruckDescription of Tractor Truck1. We produce 66 trucks with the support of an efficient research anddesign team of the technical center,

United States | Argentina | Brazil | China | France | Germany | Japan | Korea | Russia | Spain | Switzerland | Thailand | UAE | United Kingdom | Vietnam | Poland | Italy | Morocco | Malaysia | Portugal | India | Canada

Copyright © 2008 - ETW International. All rights reserved.