ChamferingMachine

Features

Our chamfering machine employs theprinciple of rolling shear to shear the edge of the steel plate according tothe angel needed, to obtain the bevel for welding. Our highefficiency, low energy consumption chamfering machine has a sound surfacefinish and is easy to operate.

Application

Mainly used for chamfering steel plates.

Specifications

Materials

Welding workpieces, cast iron

Maintenance

1.  The speedreducer should be supplied with 20# gear oil to the extent that oil pointer canbe seen at 25°chamfer degrees.  It must be oiled beforeuse
2.  The 7216 fore bearing of the spindleneeds lithium base grease. The lithium base grease should be completely changedwith new oil during any major repair.
3.  The lead screw for angle adjustment,screw for adjusting depress device and bearing device, depress device, andslide guidepost should be directly oiled with lithium base grease.  They should be checked and re-oiled everyweek.
4.  The adjustment of spindlebearings.  When the spindle loosens, theoperator should unfold the back cover of the spindle, loosen the lock washerand turn the nut clockwise.  Afteradjusting the spindle bearings to the proper position, the operator should lockthe nut with the lock washer.
5.  The knife tool should be sharpenedwhenever blunt.  Only the fore part ofthe knife can be sharpened and it should be sharpened on surface-grindingmachine. The maxim grinding quantity is 2mm. The grinding quantity each  timeshould be within 0.5mm.  When the totalgrinding quantity is over 0.5mm, a washer should be filled, in line with thegrinding quantity, between the end faces of knife tool and spindle and placedat the rear end face of the knife tool.

Packaginginformation

The following packaging is available

• Palletizing plus plywood
• Wooden case packaging
• Plastic film packaging clear packaging)

Services

1. HENGTONG Chamfering Machine comes with a one year warranty in which time we will solve any quality problems that should arise free of charge.
2. Our specialized “after sales” service personnel call and/or email our clients.  We value our customers’ feedback which helps us improve our products.
3. We attend several international trade fairs each year and visit with clients in the city the trade fair is located.
4. We reply to our customers within 24 hours (excluding holidays).