Automatic Intelligent Snow Plant Reclaim Motor

The automatic intelligent snow plant reclaim motor saves valuable time with fully automatic operation or the user can select a specific mode based on the service requirement. Vehicle Diagnosis-with a built in manifold shows technician a/c system high and low pressure readings for troubleshooting component problems. Refrigerant/Recover/Recycle-using the industry\'s largest compressor 3/4 hp all refrigerant is removed and cleaned in a single pass recycling. All recovered oil is drained automatically after the recover is completed. No manual valves to open and close. Deep Vacuum-is performed with a large 6 CFM pump and the technician can also choose a programmed timed leak vacuum leak check.Refrigerant Charging-with a state of the art strain gauge load cell unmatched recharging to accuracy of 1/4 ounce. Technicians can recharge via low or high side ports. A unique"quick charge" mode provides for topping off any system without recovering refrigerant first. Large 50 lb. DOT refillable recovery tank. Liquid Flush-using the R-134a refrigerant in closed loop flush mode the evaporator and condenser excess trapped oil can be removed to ensure maximum system cooling. Tank Refill-no need to worry about not having enough refrigerant in your tank as the Ar300 will automatically alert the user prior to recharging to add R-134aEquipment Maintenance-is simple with push button air purge for non-condensables, filter changes shown on LCD, and all refrigerant usage is displayed for shops R-134a inventory management(an optional printer is also available) .