United Kingdom
United States
Argentina
Brazil
China
France
Germany
Japan
Korea
Russia
Spain
Switzerland
Thailand
UAE
Vietnam
Poland
Italy
Morocco
Malaysia
Portugal
India
Canada
- Plastic Pipe Extrusion Line
- Plastic Machinery
- Aluminum Composite Panel (ACP) Production Line
- Roll Forming Machine
- Metal Processing Machine
- Wood Plastic Composite Production Line
- Dry Mortar Production Line
- Concrete Batching Plant
- Concrete Block Automatic Production Line
- Autoclaved Aerated Concrete Production Line
- New Building Materials Machinery
- 3D Panel Production Line
- EPS Production Line
- Sandwich Panel Lamination Line
- Glass Wool Production Line
- Rock Wool Production Line
- XPS Insulation Board Production Line
- Insulation Materials Machinery
English
Español
РусскийAutoclaved Aerated Concrete Production Line
AutoclavedAerated Concrete Production Line
Introduction of AutoclavedAerated Concrete (AAC)
With the obvious advantage of light weight, this Autoclaved Aerated Concrete(AAC) is a multi-cell new construction and building material, which is madefrom silicon material (silica sand, or recycled fly ash) and calcium material(lime, cement), mixing with foaming additive (aluminum powder), batching withwater, the reaction between aluminum and concrete causes microscopic hydrogenbubbles to form, expanding the concrete to about five times its originalvolume. Through the processes of molding, pre-curing, cutting, evaporating andcuring, this building material is then made into the multi-cell silicateproduct.
Features ofAutoclaved Aerated Concrete( AAC)
Lower density
Good heat insulation and preservation
High processibility
Fire and acoustical resistant properties
Most prominent advantage: plasticity
Application ofAutoclaved Aerated Concrete products
TechnicalParameters of Autoclaved Aerated Concrete Production Line
| Item | ACNE-10 | ACNE-15 | ACNE-20 | ACNE-30 |
| Production Capacity (103m3/year) | 100 | 150 | 200 | 300 |
| Block Size (m3) | 4.21.20.6 | 4.21.50.6 | 6.01.20.6 | 6.01.50.6 |
| Installation Power (kw) | 800 | 900 | 1300 | 1400 |
| Production Cycle (mould/min) | 6 | 6 | 4.5 | 4.5 |
| Workshop Area (m2) | 3000 | 3500 | 4000 | 5000 |
| Plant Area (m3) | 20000 | 25000 | 30000 | 35000 |
Technic Index and AutoclavedRequirements of Autoclaved Aerated Concrete Production Line
| Item | Description | |
| Raw material mixing and pouring cycle | 8 minutes | |
| Base body static curing time | 1.5~3 hours | |
| Static curing temperature: | 40 | |
| Strength after static curing | 0.2~0.3Mpa | |
| Base body cutting cycle | 6 minutes | |
| Autoclave pressure | Vacuuming | 0-0.06 Mpa, 0.5hour |
| Rising pressure | 0-1.3 Mpa, 2hours | |
| Working pressure | 1.3 Mpa (temperature 1935) 7hours | |
| Falling pressure | 1.3 -0 Mpa, 2hours | |
| Raw materials batching rate: | Sand (or Fly Ash) | 69% |
| Lime | 20% | |
| Cement | 8 % | |
| Gypsum | 3% | |
| Aluminum powder | 0.074% | |
Note: The accurate raw material batching rate is adjustable according tolocal raw material.
- Concrete Block Automatic Production LineConcreteBlock Automatic Production LineIntroduction ofConcrete Block Automatic Production Line 1. By adopting the international famous brandfor the ke
- Concrete Batching PlantConcreteBatching PlantIntroduction of Concrete Batching PlantThe concrete batching plant can be customizedaccording to clients detail requirements suc
- Dry Mortar Production LineDryMortar Production LineIntroduction of Dry Mortar 1. In contrast to job-site mortars, dry mortar is also called pre-mixed mortar,which is produced i
- Wood Plastic Composite Production LineWoodPlastic Composite Production LineIntroduction of Wood Plastic CompositeWith the feature of anti-acid, antiseptic, fireproof, waterproof and beauti
- Metal Processing Machine Metal Processing Machine