ETW,CDMA Pico Repeater,China CDMA Pico Repeater Manufacture

Product List

Manufacturers

CDMA Pico Repeater

CDMA Pico Repeater

CDMA Pico Repeater
RCTC800X1555
RCTCX

The CDMA pico repeater is practical for small areas indoor DAS system, with quick coverage solution for weak signals reducing drop/off calls and eliminates the signal dead spot, rejecting the interference and providing a stable signal communication for cell phones. The CDMA pico repeater has power supply and output power indications; with ALC function that provides high reliability and stability and low interference to BTS. The CDMA pico repeater can be used in basements, cars, elevators, parking lots, villages, tunnels, mines, clubs, residential houses, countryside, tall buildings, vessels, underground facilities or any other place.

Electrical Specification CDMA Pico Repeater
Uplink

Item	Electric SPEC		Unit	Note
Frequency range	824-849MHz	/	/
Operating Bandwidth	824-849MHz	5-25M	MHz	Customizable
Maximum Output power		0~15	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		≥ 60	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Ripple in band		≤6	dB
Out of band rejection	Fo+/-400kHz	≤50	dB
	Fo+/-600kHz	≤40	dB
	Fo+/-1MHz	≤35	dB
	Fo+/-5MHz	≤25	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	/
Noise Figure at Max. System Gain		≤8	dB
System Group Delay		≤5.5	μs
Frequency Stability		≤0.05ppm	Hz

Downlink

Item	Electric SPEC		Unit	Note
Frequency range	869-894MHz	/	/
Operating Bandwidth	869-894MHz	5-25M	MHz	Customizable
Maximum Output power		0~15	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain	940-955MHz	<=65	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤7	dB
Out of band rejection	Fo+/-400kHz	≤50	dB
	Fo+/-600kHz	≤40
	Fo+/-1MHz	≤35
	Fo+/-5MHz	≤25
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	/
Noise Figure at Max. System Gain		≤8	dB
System Group Delay		≤5	μs
Frequency Stability		≤0.05ppm	Hz

Mechanical Characteristic of CDMA Pico Repeater

Mechanical Characteristic
Connectors	N-female
Power Supply	DC6V 3A, AC 110~240V
Operating Temperature	-10 ℃ ~+50℃
Humidity	90%
Power Consumption	≤10W max
Dimension (DWH)	14610425( mm)
weight	≤1g

Note: Typical specifications at room temperature. VSWR test condition is uplink and downlink ATT setting 25dB

LED Function Indication for CDMA Pico Repeater

LED	Function	Working mode	Failure
Red Light	Warning	Red LED is off, the device is working normal.	Connect with power supply, LED is on while there is no conversation, which means autoexcitation warning or loosening of lock.
Green Light	Indication of power supply	LED is flickering, the device is working normal.	LED is off; the power supply is not working normal.

We are a professional CDMA Pico repeater manufacturer and supplier in China. We offer crystal resonator, SAW resonator, RF module, and TCXO, among others.

Feedback Form

Other Products

926MHz SAW Filter 926MHz SAW Filter HDF926MS-3 Scope This specification covers the characteristics of SAW filter w

447MHz SAW Resonator 447MHz SAW Resonator HDR447.725MS-6 Scope This specification covers the charac

Crystal Resonator Crystal Resonator Quartz crystal, or just known as crystal, is an important piezoelectric material. Its constituent atom

Radio Receiver Module Radio Receiver Module RCT01MRXB21 RCT01MRXB21 UHF radio receiver module is a superheterodyne receiver module. The set

433M RF Receiver Module 433M RF Receiver Module RCT01MRXB16 The 433M RF receiver module is a superheterodyne receiver module. The set carrier f