Amorphous Transformer Machine

This amorphous transformer is newly developedwith amorphous core which has no-load loss 20% less than conventional CRGOcores!
We can provide complete machines for producing amorphous transformers, andtechnology support as well.

Amorphous CuttingMachine

This amorphous cutting machine is specially designed forautomatic cutting and stacking amorphous strips for cores.
This line adopts PLC control, servo drive, touch screen operation and highprecision mechanical transmitting mechanisms, thereby ensuring high automation,high productivity and high reliability.
It is particularly suitable for processing 3-phase-3-column big amorphous alloycores.

MainTechnical Data of Amorphous Cutting Machine
Amorphous alloy core information
1) Window height: 150-2000mm
2) Window width: 50-1500mm
3) Piling thickness: 25-150mm
Amorphous strip width: 140-230mm Cut-to-length: max. 5000mm, min. 300mm Cuttingthickness: max. 15 layers, each 0.025mm thick Cut-to-length precision: 0.5mmCutting angle: 90 degree Cutting angle precision: 0.05 degree Stackingprecision: 0.5mm Production speed:
1) Feeding speed: 5-80m/min
2) Cutting speed: 0-20 times per minute
Power source 1) Electric power: 10kW, 3-phase,5-wire, 380V, 50Hz
2) Air consumption: 0.3m3/minLine occupation: 13m x 1m x 1.8m (L x W x H)

Annealing Furnace

Main Technical Data
Whole dimension: 2250 x 1900 x 2360mm
Annealing room size: 1500 x 1500 x 1700mm
Max. temperature: 450
Rated power: 78kW, 3 phase
Heating duration: less than 3 hours
Temperature evenness: +/-10
Separate temperature control system (PID, 30-section programmable temperaturecontroller, with over-temperature shut-off and over-temperature alarmingfunctions.
Each phase of heating tube has 200A fuse and three current meters, separatecontrol switch Equipped with 6 temperature sensors with numerical displaying,one for body itself, five for detecting product
Furnace is filled with nitrogen gas. Start/stop filling is controlled byelectromagnetic valve which is PLC programable.