ETW,AFS Pressure Switches (12-2500 Pa),China AFS Pressure Switches (12-2500 Pa) Manufacture

Manufacturers

AFS Pressure Switches (12-2500 Pa)

English

Français

Русский

AFS Pressure Switches (12-2500 Pa)

The AFS pressure switches are general purpose airflow proving switches designed for HVAC, detection of blocked filters and fan suction, air flow monitoring in ducts, pipes, tunnels, and other energy management applications. It may be used to sense positive, negative or differential air pressure.
The plated housing contains a diaphragm, a calibration spring and a snap-acting switch. The sample connections located on each side of the diaphragm accept a 0.25" OD tubing via the integral compression and nut. An enclosure cover guards against accidental contact with the live switch terminal screws and the set point adjusting screw. The enclosure cover will accept a 0.5" conduit connection. The AFS-460 Pressure Switch has a reset button located on the top surface of the enclosure cover.

Technical Data

Model	AFS-1	AFS-2	AFS-3
Medium	Air	Air	Air
Mounting Position	Diaphragm in any vertical plane	Diaphragm in any vertical plane	Diaphragm in any vertical plane
Field Adjustable Range	0.160.02" W.C. to 12.0" W.C.	0.160.02" W.C. to 2.0" W.C.	0.400.06" W.C. to 12.0" W.C.
Switch Differential	Progressive, increasing from approximately 0.10.02" W.C at minimum set point, to approximately 0.8" W.C. at maximum set point.	Progressive, increasing from approximately 0.10.02" W.C at minimum set point, to approximately 0.1" W.C. at maximum set point.	Progressive, increasing from approximately 0.10.02" W.C at minimum set point, to approximately 0.8" W.C. at maximum set point.
Maximum Pressure	0.5psi (0.03bar)	0.5psi (0.03bar)	0.5psi (0.03bar)
Operating Temperature Range	-40-82	-40-82	-40-82
Electrical Rating	300 VA pilot duty at 115-277VAC, 10amp, non-inductive, 277VAC, 60Hz.	300 VA pilot duty at 115-277VAC, 10amp, non-inductive, 277VAC, 60Hz.	300 VA pilot duty at 115-277VAC, 10amp, non-inductive, 277VAC, 60Hz.
Electrical Connections	Screw top terminals with cup washers	Screw top terminals with cup washers	Screw top terminals with cup washers
Sample Line Connections	Ferrule and nut compression type connectors that accept 0.25" OD rigid tubing.	Ferrule and nut compression type connectors that accept 0.25" OD rigid tubing.	Ferrule and nut compression type connectors that accept 0.25" OD rigid tubing.
Contact Arrangement	SPDT	SPDT	2 SPST-NC (manual reset)

Note: 1mbar=100Pa 1"W.C.=249Pa

Feedback Form

Other Products

HP-2 Pressure Switch The pressure switch is used for pressure controlling of Air, Water, Internal wiring of electric refrigerating equipment or room cooler units or remot

HP-3 Extended Duty Pressure Switch The extended duty pressure switch is specifically designed to stand up to extended duty applications. This switch is factory set but capable of field

HP-4 Vacuum Switch The vacuum switch is specifically designed to stand up to extended duty applications. This vacuum switch is factory set. It features a rubber diaphra

HP-5 High Pressure Switch The high pressure switches are robust, compact and designed to operate in harsh environments at various pressures. Because of its special internal de

HP-1 Pressure Switch The pressure switch is designed for control pressure with higher current capacity. It is widely used in steam cleaner, steam sadiron and other pressu