Descriptionof ABS Desk Sphygmomanometer, ABS Wall Sphygmomanometer
Our ABS desk type sphygmomanometer, ABS wall type sphygmomanometer has finequality instrument, which features advanced non-stop pin mechanism, precisecontrol valve, durable cuff to offer you utmost reliable and accurate bloodpressure measurement experience for both professional and home use.

Applications OfABS Desk Sphygmomanometer, ABS Wall Sphygmomanometer
For clinical use and also suitable for home and self assessment

Operation and Precautions
(1) Connect the cuff and gauge.
(2) The user should be in a warm environment .Tight or restrictive clothingshould be removed from the arm. Sit down at a table or desk where you caneasily rest your arm. So the middle of the cuff is over the brachial arterypulse. Position the cuff approximately 2.5cm above the elbow and slip the toppart of the cuff through the metal bar that is attached to the cuff, Most cuffs have Velcro, making it easy to keep the cuff inplace.
Make sure the cuff is snug, not be too tight. Two fingers should be easily putin between cuff and arm .The cuff should be at about the same height as yourheart. If someone else is taking your blood pressure, you may recline.
(3) Gently place the stethoscopes ear pieces in your ears.
(4) Place the head of the stethoscope just below(1-4in or 2.5-8 cm) the armpit, near the inside middle side of the arm, It must notbe pressed too firmly or touch the cuff, or the diastolic pressure may beunderestimated.
(5) Pump the bulb slowly but steadily until thepressure reached about 30mmHg above your usual systolic pressure. If you havenever measured your blood pressure, please inflate the pressure to 180 mmHg.
(6) Now, stop inflation and push the deflation button gently with thumb so asto get the pressure drop slowly and steadily at about 2-3 mmHg per second.Listen and watch the dial plate carefully during deflation, the point at whichrepetitive, clear tapping sounds first appear for at least two consecutivebeats gives the systolic blood pressure. The point where the repetitive soundsfinally disappear gives the diastolic blood pressure.
(7) After you get the diastolic pressure, push the deflation button to the endfor rapid deflation.
(8) Remove the stethoscope and cuff from arm after the pressure in the cuffbottoms out.

Careand Maintenance
Protect it from:
Overladen inflation more than 300mmHg
Water and moisture
Extreme temperatures
Impact and dropping
Contamination and dust
Direct sunlight

Cleaningthe cuff
The cuffs are sensitive and must be handled with care.You can clean the cuff cover with damp cloth.
Warning: under no circumstances may you wash the inner bladder
Attention: Sterilization is not necessary since the parts of manometer shouldnot come into direct contact with the patients body during measurement
Calibration
The device must be calibrated for the sake of reliable performance andaccuracy. Thus, we kindly recommend a fixed check of static pressure displayper 2 years
Consult the dealer for more information on it
Warranty
There is a years guarantee with the whole set of this device from thepurchasing date.
The guarantee is effective under the condition of correct handle and operationin accordance with items listed. Any improper handle and operation is excludedfrom the guarantee.
The guarantee service only takes effect with presentation of the warranty cardissued and filled out by the dealer.
Please properly take care of this warranty card.

Tlot Medical System Company Ltd. is a professionalmanufacturer and supplier of ABS desk type sphygmomanometer, ABS wall typesphygmomanometer in China.We possess 21 years experience of producing, selling and serving. Our productsalso passed CE certification. Our companys products have been exported to Egypt, Syria,Afghan, Indonesia, Lebanon, Nigeria,Yemen, Peru, Iraq,Pakistan, USA, Canada,and Mexico.If you need ABS desk sphygmomanometer, ABS wall sphygmomanometer, pleasecontact us and we hope you can visit our factories by yourselves. You can byT/T, Western Union, Credit Card, and Paypal to complete the transaction.