ETW,AAAC / All Aluminium Alloy Conductor,China AAAC / All Aluminium Alloy Conductor Manufacture

Product List

Manufacturers

AAAC / All Aluminium Alloy Conductor

AAAC / All Aluminium Alloy Conductor

AAAC/All Aluminum Alloy Conductor

Description
The light-weight all aluminum alloy conductor has such advantages as high strength, nonexistence of electrochemical corrosion, long service life, sound electricity conductivity, etc. It is used to transmit current and is made through stranding aluminum alloy wires instead of aluminum wires in a spiral manner and according to a certain rule. Its tensile strength is 1.7-1.8 times of that of an ordinary conductor. The rigidity of our AAAC is very high so the surface scratch when putting up transmission lines can be minimized and the construction quality can be greatly improved.

Application
The all aluminum alloy conductor is used for overhead power transmission lines, especially the electric power augmentation of old transmission lines. Tong-Da has been specialized in the research and application of AAAC for almost ten years. Japan respectively used the overhead AAAC for 110kV and 220kV transmission lines with large span length in 1959 and 1962. When replacing the aluminum conductor steel reinforced, our all aluminum alloy conductor can save 5-8% of the construction cost. China currently employs this kind of technology, as well as Tong-Da. This AAAC coversaluminumalloy(hard solution,heat-treated,coldworked,andartificiallyaged)roundwiresforelectricalpurposestobeused ascomponentwiresof aluminum alloy conductor and aluminum alloy conductor steel reinforced.

Standard

ASTM B 399, BS 3242, BS EN 50183, IEC 61089, DIN 48201, etc.

AAAC 6201 Aluminum Alloy Conductors ASTM B 399

Code Name	Area		Size and Stranding of ACSR with Equal Dia.		Stranding	Overall Dia.	Weight	Nominal Breaking Load	Standard Length
Code Name	Nominal	Actual	Size and Stranding of ACSR with Equal Dia.		Stranding	Overall Dia.	Weight	Nominal Breaking Load	Standard Length
	MCM	mm2	AWG or MCM	Al/St.		mm	kg/km	kN	m5%
AKRON	30.58	15.48	6	6/1	7/1.68	5.04	42.7	4.92	3000
ALTON	48.69	24.71	4	6/1	7/2.12	6.35	68.0	7.84	3000
AMES	77.47	39.22	2	6/1	7/2.67	8.02	108	12.45	2000
AZUSA	123.3	62.38	1/0	6/1	7/3.37	10.11	172	18.97	2000
ANAHEIM	155.4	78.65	2/0	6/1	7/3.78	11.35	217	23.93	3000
AMHERST	195.7	99.22	3/0	6/1	7/4.25	12.75	273	30.18	2500
ALLIANCE	246.9	125.1	4/0	6/1	7/4.77	14.31	345	38.05	2000
BUTTE	312.8	158.6	266.8	26/7	19/3.26	16.30	437	18.76	3000
CANTON	394.5	199.9	336.4	26/7	19/3.66	18.30	551	58.91	2500
CAIRO	465.4	235.8	397.5	26/7	19/3.98	19.88	650	69.48	2000
DARIEN	559.5	283.5	477	26/7	19/4.36	21.79	781	83.52	2000
ELGIN	652.4	330.6	556.5	26/7	19/4.71	23.54	911	97.42	1500
FLINT	740.8	375.3	636	26/7	37/3.59	25.16	1035	108.21	3000
GREELEY	927.2	469.8	795	26/7	37/4.02	28.14	1295	135.47	2500

All Aluminum Alloy Conductors ASTM B 399

Area		Stranding	Approx.Dia.	Weight	Nominal Breaking Load	D.C. Resistance at20	Standard Length
Nominal	Actual	Stranding	Approx.Dia.	Weight	Nominal Breaking Load	D.C. Resistance at20	Standard Length
AWGorMCM	mm2	mm	mm	kg/km	kN	ohm/km	m5%
6	13.30	7/1.554	4.67	37	4.22	2.5199	3500
4	21.15	1/1.961	5.89	58	6.71	1.5824	3000
2	33.63	7/2.474	7.42	93	10.68	0.9942	2500
1/0	53.48	7/3.119	9.36	148	16.97	0.6256	2000
2/0	67.42	7/3.503	10.51	186	20.52	0.4959	3500
3/0	85.03	7/3.932	11.80	234	25.86	0.3936	3000
4/0	107.23	7/4.417	13.26	296	32.63	0.3119	2000
250	126.66	19/2.913	14.57	349	38.93	0.2642	2000
300	152.10	19/63.193	15.97	419	46.77	0.2199	3000
350	177.35	19/3.447	17.24	489	52.25	0.1887	3000
400	202.71	19/3.686	18.43	559	59.74	0.1650	2500
450	228.00	19/3.909	19.55	629	67.19	0.1467	2000
500	253.35	19/4.120	20.60	698	74.64	0.1321	2000
550	278.60	37/3.096	21.67	768	83.80	0.1202	2000
600	303.80	37/3.233	22.63	838	91.38	0.1102	2000
650	329.25	37/3.366	23.56	908	97.94	0.1016	2000
700	354.55	37/3.493	24.45	978	102.20	0.0944	3500
750	380.20	37/3.617	25.32	1049	109.60	0.0880	3000
800	405.15	37/3.734	26.14	1117	116.80	0.0826	3000
900	456.16	37/3.962	27.73	1258	131.50	0.0733	3000
1000	506.71	37/4.176	26.23	1300	146.10	0.0660	2500

Aluminum Alloy Conductors BS EN 50183

Area.	No.of wires	Diameter		Weight	Rated Strength	D.C. Resistance at 20	Standard Length
Area.	No.of wires	Wire	Cond.	Weight	Rated Strength	D.C. Resistance at 20	Standard Length
mm2		mm	mm	kg/km	kN	ohm/km	m5%
15.9	7	1.70	5.10	43.3	4.69	2.0701	3000
24.2	7	2.10	6.30	66.2	7.15	1.3566	3000
34.4	7	2.50	7.50	93.8	10.14	0.9572	3000
49.5	7	3.00	9.00	135.1	14.60	0.6647	3000
48.3	19	1.80	9.00	132.7	14.26	0.6841	3000
65.8	19	2.10	10.5	180.7	19.41	0.5026	2000
93.3	19	2.50	12.5	256.0	27.51	0.3546	2000
117.0	19	2.80	14.0	321.2	34.51	0.2827	2000
147.1	37	2.25	15.8	405.3	43.40	0.2256	2000
181.6	37	2.50	17.5	500.3	53.58	0.1827	2000
242.5	61	2.25	20.3	670.3	71.55	0.1373	2000
299.4	61	2.50	22.5	827.5	88.33	0.1112	2000
400.1	61	2.89	26.0	1105.9	118.04	0.0832	2000
499.8	61	3.23	29.1	1381.4	147.45	0.0666	2000
626.2	91	2.96	32.6	1737.7	184.73	0.0534	2000
802.1	91	3.35	36.9	2225.8	236.62	0.0417	2000
999.7	91	3.74	41.1	2774.3	294.91	0.0334	2000

All Aluminum Alloy Conductors (AAAC) BS EN 50183

Designation	Area	Stranding		Overall Dia.	Nominal Breaking Load	D.C. Resistance at 20	Standard Weight	Standard Length
	mm2	No	mm	mm	kN	ohm/km	kg/km	m5%
ASTER 22	22.0	7	2.00	6.00	7.15	1.4989	60.0	4000
ASTER 34.4	34.4	7	2.50	7.50	11.17	0.9593	93.8	3000
ASTER 54.6	54.6	7	3.15	9.45	17.73	0.6042	148.9	3000
ASTER 75.5	75.5	19	2.25	11.3	24.55	0.4388	207.4	3000
ASTER 117	117.0	19	2.80	14.0	38.02	0.2833	321.2	2000
ASTER 148	148.1	19	3.15	15.8	48.12	0.2239	406.5	2000
ASTER 181.6	181.6	37	2.50	17.5	59.03	0.1831	500.3	2000
ASTER 228	227.8	37	2.80	19.6	74.04	0.1460	627.6	2000
ASTER 288	288.3	37	3.15	22.1	93.71	0.1154	794.3	2000
ASTER 366	366.2	37	3.55	24.9	115.36	0.0908	1008.9	2000
ASTER 570	570.2	61	3.45	31.1	185.33	0.0585	1576.0	2000
ASTER 851	850.7	91	3.45	38.0	276.47	0.0394	2360.7	2000
ASTER 1144	1143.5	91	4.00	44.0	360.22	0.0293	3173.4	2000
ASTER 1600	1595.9	127	4.00	52.0	502.72	0.0210	4427.5	2000

All Aluminum Alloy Conductors BS EN 50183

ColdName	Area	No.of wires	Diameter		Weight	Rated Strength	D.C. Resistance at20
ColdName	Area	No.of wires	Wire	Cond.	Weight	Rated Strength	D.C. Resistance at20
	mm2		mm	mm	kg/km	kN	/km
BOX	18.8	7	1.85	5.55	51.1	5.55	1.7480
ACACLA	23.8	7	2.08	6.24	64.9	7.02	1.3828
ALMOND	30.1	7	2.34	7.02	82.2	8.88	1.0926
CEDAR	35.5	7	2.54	7.62	96.8	10.46	0.9273
DEODAR	42.2	7	2.77	8.31	115.2	12.44	0.7797
FIR	47.8	7	2.95	8.85	130.6	14.11	0.6875
HAZEL	59.9	7	3.30	9.90	163.4	17.66	0.5494
PLNE	71.6	7	3.61	10.8	195.6	21.14	0.4591
HOLLY	84.1	7	3.91	11.7	229.5	24.79	0.3913
WILLOW	89.7	7	4.04	12.1	245.0	26.417	0.3665
OAK	118.9	7	4.65	14.0	324.5	35.07	0.2767
MULBERRY	150.9	19	3.18	15.9	414.3	44.52	0.2192
ASH	180.7	19	3.48	17.4	496.1	53.31	0.1830
ELM	211.0	19	3.76	18.8	579.2	62.24	0.1568
POPLAR	239.4	37	2.87	20.1	659.4	70.61	0.1387
SYCAMORE	303.2	37	3.23	22.6	835.2	89.40	0.1095
UPAS	362.1	37	3.53	24.7	997.5	106.82	0.0917
YEW	479.0	37	4.06	28.4	1319.6	141.31	0.0693
TOTARA	498.1	37	4.14	29.0	1372.1	146.93	0.0666
RUBUS	586.9	61	3.50	31.5	1622.0	173.13	0.0567
SORBUS	659.4	61	3.71	33.4	1822.5	194.53	0.0505
ARAUCARIA	821.1	61	4.14	37.3	2269.4	242.24	0.0406
REDWOOD	996.2	61	4.56	41.0	2753.2	293.88	0.0334

Characteristics of A2 Conductors IEC 61089

Code number	Area	No.of wires	Diameter		Linear mass	Rated strength	D.C. Resistance at20
Code number	Area	No.of wires	Wire	Cond	Linear mass	Rated strength	D.C. Resistance at20
	mm2		mm	mm	kg/km	kN	ohm/km
16	18.4	7	1.83	5.49	50.4	5.43	1.7896
25	28.8	7	2.29	6.86	78.7	8.49	1.1453
40	46.0	7	2.89	8.68	125.9	13.58	0.7158
63	72.5	7	3.63	10.9	198.3	21.39	0.4545
100	115	19	2.70	13.9	316.3	33.95	0.2877
125	144	19	3.10	15.5	395.4	42.44	0.2302
160	184	19	3.51	17.6	506.1	54.32	0.1798
200	230	19	3.93	19.6	632.7	67.91	0.1439
250	288	19	4.39	22.0	790.8	84.88	0.1151
315	363	37	3.53	24.7	998.9	106.95	0.0916
400	460	37	3.98	27.9	1268.4	135.81	0.0721
450	518	37	4.22	29.6	1426.9	152.79	0.0641
500	575	37	4.45	31.2	1585.5	169.76	0.0577
560	645	61	3.67	33.0	1778.4	190.14	0.0516
630	725	61	3.89	35.0	2000.7	213.90	0.0458
710	817	61	4.13	37.2	2254.8	241.07	0.0407
800	921	61	4.38	39.5	2540.6	271.62	0.0361
900	1036	91	3.81	41.8	2861.1	305.68	0.0321
1000	1151	91	4.01	44.1	3179.0	339.53	0.0289
1120	1289	91	4.25	46.7	3560.5	380.27	0.0258
1250	1439	91	4.49	49.4	3973.7	424.41	0.0231

Characteristics of A3 Conductors IEC 61089

Code number	Area	No. of wires	Diameter		Linear mass	Rated strength	D.C. Resistance at 20
Code number	Area	No. of wires	Wire	Cond	Linear mass	Rated strength	D.C. Resistance at 20
	mm2		mm	mm	kg/km	kN	ohm/km
16	18.6	7	1.84	5.52	50.8	6.04	1.7896
25	29.0	7	2.30	6.90	79.5	9.44	1.1453
40	46.5	7	2.91	8.72	127.1	15.10	0.7158
63	73.2	7	3.65	10.9	200.2	23.06	0.4545
100	116	19	2.79	14.0	319.3	37.76	0.2877
125	145	19	3.12	15.6	399.2	47.20	0.2302
160	186	19	3.53	17.6	511.0	58.56	0.1798
200	232	19	3.95	19.7	638.7	73.20	0.1439
250	290	19	4.41	22.1	798.4	91.50	0.1151
315	366	37	3.55	24.8	1008.4	115.29	0.0916
400	465	37	4.00	28.0	1280.5	146.40	0.0721
450	523	37	4.24	29.7	1440.5	164.70	0.0641
500	581	37	4.47	31.3	1600.6	183.00	0.0577
560	651	61	3.69	33.2	1795.3	204.96	0.0516
630	732	61	3.91	35.2	2019.8	230.58	0.0458
710	825	61	4.15	37.3	2276.2	259.86	0.0407
800	930	61	4.40	39.6	2564.8	292.80	0.0361
900	1046	91	3.83	42.1	2888.3	329.40	0.0321
1000	1162	91	4.03	44.4	3209.3	366.00	0.0289
1120	1301	91	4.27	46.9	3594.4	409.92	0.0258

Construction
Stranded Aluminum-Magnesium-Silicon group alloys, duly heat treated.

Package
The AAAC is packaged in woodendrum,steelwoodendrum,steeldrumorcoil.

Tong-Da is a professional all aluminium alloy conductor manufacturer and supplier in China. Our products include: AAC, AAAC, ACSR, Galvanized Steel Wire, Aluminium Clad Steel Wire, PVC wire, PVC/XLPE power cable, Aerial Bundled Cable, rubber cable, control cable, etc.

Feedback Form

Other Products

AAC / All Aluminium Conductor AAC/All Aluminum ConductorApplicationThis all aluminum conductor is a kind of aluminum product made through stranding aluminum wires. It is used

ACSR / Aluminium Conductor Steel Reinforced ACSR/Aluminum Conductor Steel ReinforcedDescriptionThe aluminum conductor steel reinforced is made through stranding aluminumwires and steel wires, a

Anti-Corrosion ACSR Anti-Corrosion ACSRApplicationWith the anti-corrosion coating painted on the original ACSR surface, the corrosion resistance of the anti-corrosi

Aluminium Conductors Steel Reinforced,ASTM B 232 Aluminum Conductors Steel Reinforced, ASTM B 232 CodenameAreaStrandingApprox.overalldiameterWeightNominalbreakingloadD.C.Resistanceat20Standardlengt

ACSR/AS - Aluminium Conductor Aluminium Clad Steel Reinforced ACSR/AS-Aluminum Conductor Aluminum Clad Steel ReinforcedDescriptionThe aluminum conductor aluminum clad steel reinforced uses the aluminum clad