KISS-330HF Flat-bed Die Cutter with Hot Foil Stamping Module

KISS-330HF Flat-bed Die Cutter with Hot Foil Stamping Module
KISS-330HF Flat-bed Die Cutter with Hot Foil Stamping Module
KISS-330HF Flat-bed Die Cutter with Hot Foil Stamping Module
KISS-330HF Flat-bed Die Cutter with Hot Foil Stamping Module
KISS-330HF Flat-bed Die Cutter with Hot Foil Stamping Module
Request a Quote

KISS-300HF flat-bed die cutter with hot foil stamping module have cutting accuracy up to ±0.15. This machine consist of hot foil stamping unit, electric heater unit, servos for foil feeding and delivering, while reaching stabilized rotational speed of 120m per minute.

KISS-330HF provides hot foiling system, electric heating control, and intermittent foiling, and offers continuous tension for higher efficiency and register precision performance.

Parameters
Max Speed 120 m/min
Accuracy of Adhesive Cutting ±0.15 mm
Registration Mark Sensor
Max Hot Foil Dia. 300 mm
Hot Foil Feeding Direction 0°~90°
Max Hot Foil Rolls 8 rolls
Foil Jump Adjustment support by servo
Accuracy of Foil Register ±0.15 mm
Heat range 0 ~ 200 ℃
Max Slitting Width 16 mm
Max unwinder dia. 700 mm
Max rewinder dia. 700 mm
Air Supply 0.4 ~ 0.6 MPa
Total Motor Power 30 kw
Dimension 2600 x 1200 x 1700 mm
Weight 3500 KGS
Introduction

Foil feeding and delivery system
Our flatbed hot foil stamping is low cost and easy to operate. It comes with independently controlled the speed for the hot foil stamping and machine. Different foil strip of diameter is allowed in order to minimize waste, maximum diameter is up to 3000m. The maximum hot stamping area is 320mm*305mm.

Slitter
Slitting station is equipped with automatic two roll slitter. Circular blade, razor blade and straight blade are available for purchase.
Female and male blades for shear slitting can be easily installed and adjusted. Six full sets of blades will be provided.

Rewinder
Rewinder with closed-loop tension control system ensures continuous stable tension, 700mm maximum rewind diameter.

Unwinder & web guiding
Unwinder with closed-loop tension control. Electronic web guide with ultrasonic.

Flatbed die cutter
Independent, servo-driven high-speed cutter for adhesive paper, labels and laser marks.

Related products
Send Message
Inquiry
Inquiry