Platinum Cured Silicone Rubber
Request a Quote
This product has been discontinued and removed from our shelves.
Applications
Our platinum cured silicone rubber is suitable for manufacturing of O-rings, washers, gaskets, etc.
Features
- Rapid vulcanization;
- Easy de-molding;
- Non-yellowing;
- Good resilience;
- Suitable for mechanical edge finishing;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.
Test
Addition A type agent 0.5%, B type agent 0.8%, 120℃×3min×15Mpa
Technical Data
- Model:
HT-8130 - Appearance: Translucent
- Processability: 200-200
- Hardness (Shore A): 30
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 850
- Tear strength (K N/m): 15
- Model:
HT-8140 - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 40
- Density (g/cm3): 1.13
- Tensile strength (Mpa): 7
- Elongation (%): 750
- Tear strength (K N/m): 20
- Model:
HT-8150 - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 50
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 7
- Elongation (%): 650
- Tear strength (K N/m): 15
- Model:
HT8160 - Appearance: Translucent
- Processability: 230-260
- Hardness (Shore A): 60
- Density (g/cm3): 1.15
- Tensile strength (Mpa): 7
- Elongation (%): 550
- Tear strength (K N/m): 15
- Model:
HT-8170 - Appearance: Translucent
- Processability: 260-280
- Hardness (Shore A): 70
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 450
- Tear strength (K N/m): 15
- Model:
HT-8180 - Appearance: Translucent
- Processability: 250-280
- Hardness (Shore A): 80
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 300
- Tear strength (K N/m): 15
- Model:
HT-8190 - Appearance: Translucent
- Processability: 260-290
- Hardness (Shore A): 90
- Density (g/cm3): 1.22
- Tensile strength (Mpa): 7
- Elongation (%): 200
- Tear strength (K N/m): 15
Related Manufacturies
Leave Message
Similar Manufacturies and Parts
Manufacturer Advertising
More
Similar Manufacturies and Parts
Videos
